Help
Get MediaShoot running in about two minutes, then find answers and fixes below.
On this page
Getting started
- Install MediaShoot on your PC. Get it free from the Microsoft Store (details on the Windows app page). It runs in the system tray.
- Install the MediaShoot Android app on your phone, open it and allow photo access when asked.
- Put both on the same Wi-Fi network.
- Scan the QR code. On your PC, right-click the MediaShoot tray icon and choose Pair new phone (the window also opens on its own the first time). In the Android app tap Scan QR to pair and scan the code. The QR code is valid for 5 minutes.
- Done. After pairing, new photos you take are sent to your PC automatically whenever it is on the same Wi-Fi.
Get it from the Microsoft Store
See the Features guide for everything else the app can do.
Videos, People, Albums: how to use them
- Videos: allow video access in the Android app when asked. Videos then go to your PC with your photos (Wi-Fi only by default).
- People: on the PC, open the gallery, choose People, Install face tools (about 37 MB, asks first), then Scan my photos. Name the people you find and fix mistakes with This is not them.
- Albums: on the PC, open the gallery and choose Albums. They are grouped by time and place with no extra download.
- Slideshow video: open an album or a person and choose Make a video. The first time, the app offers to install ffmpeg (about 110 MB, asks first).
People, Albums and slideshow videos are made by the Windows app on your PC; the phone app does not make them. Everything stays on your PC. Face matching is still being tuned. Details: Features.
FAQ
Setup
Where do I get the Windows app?
From the Windows app page. It is on the Microsoft Store. It needs Windows 10 (1809 or later) or Windows 11, 64-bit.
Windows says "Windows protected your PC" (SmartScreen). Is that safe?
The early installer is not code-signed yet, so SmartScreen warns about an unrecognised app. If you downloaded it from this site, choose More info, then Run anyway. Installing from the Microsoft Store avoids this warning.
How do I pair my phone?
Pairing is by QR code only. On your PC right-click the tray icon and choose Pair new phone (the window also opens on its own the first time you start MediaShoot). You can also pair from the app window: left-click the tray icon to open MediaShoot. In the Android app tap Scan QR to pair. The code is single use and valid for 5 minutes; if it expires, open the pairing window again for a new one.
Does the PC need to stay on?
MediaShoot runs in the Windows tray and must be running to receive photos. You can turn on Start with Windows in Settings so it starts when you sign in.
Your photos and privacy
Do my photos go to the cloud?
No. Photos go directly from your phone to your own PC. We do not run servers that receive, store, or see your photos. See the privacy policy, how it works, and verify it yourself with free tools.
Is the connection secure?
Uploads use HTTPS. Your phone remembers your PC's certificate when you scan the QR code, and each paired phone gets its own access token. The PC checks every file's size and checksum when it arrives.
Where are my photos saved, and can I change the folder?
Photos are saved in a normal Windows folder, by default Pictures\PhotosUploader, organized by year and month, with their original names and dates. To open it, right-click the tray icon and choose Open photos folder. To change the folder, open MediaShoot (left-click the tray icon, or choose Open MediaShoot in the tray menu), go to Settings, and set the photos folder. New photos go to the new folder right away; photos already saved are not moved.
What gets uploaded
Which photos are uploaded?
Photos you take after pairing are sent automatically. In the app, tap Folders to choose, for each phone folder (for example Screenshots or WhatsApp), whether it is backed up automatically, only when you ask, or never. To import photos you already have, use Sync past photos and pick a date range. A coming update makes folders other than the camera Manual by default. Videos are not supported yet.
What if my PC is off or I am away from home?
Photos wait in a queue on your phone and upload on their own when your PC is reachable again. A photo that already exists on the PC is not uploaded twice.
Does MediaShoot delete photos from my phone?
Not by default. The delete policy is Never until you change it in the app. You can choose Immediately or After N hours (24 hours by default). A photo is offered for deletion only after your PC has confirmed it has an identical copy, and Android asks you to confirm each batch. Photos you untick are kept and never offered again. Deleting needs Android 11 or later.
Can I pause syncing?
Yes. Tap Pause sync for now on the main screen and choose 1 hour, until tomorrow morning, or until you resume. Nothing is uploaded or offered for deletion while paused, but new photos are still noticed and wait in the queue. Tap Resume (or let the timer end) and they upload.
What is remote access?
An optional setting that lets your phone upload when you are away from home, through your own router. It is off by default. You can turn it on or off in Settings, or with the checkbox in the pairing window. Without it, photos taken away from home wait until you are back on your home Wi-Fi.
How do I remove a paired phone?
On your PC, open MediaShoot (left-click the tray icon), go to Phones, and remove the phone. That phone can no longer upload. You can pair it again at any time by scanning a new QR code. Do this if you lose or sell a phone.
Troubleshooting
Find your symptom, then try the fix.
My phone cannot find my PC
Likely cause: MediaShoot is not running on the PC, the PC is asleep, or the devices are not on the same network.
Fix: Make sure MediaShoot is running in the PC's system tray and the PC is awake. Put the phone and PC on the same Wi-Fi network (guest networks and some VPNs block the connection). If it still fails, pair again by scanning a new QR code.
The Windows firewall may be blocking it
Likely cause: The installer adds a firewall rule for private and domain networks. If Windows treats your Wi-Fi as a Public network, the rule does not apply.
Fix: In Windows Settings, open your Wi-Fi network's properties and set the network profile to Private.
Phone and PC are on different Wi-Fi networks, or the router isolates devices
Likely cause: The phone and PC are on different networks (for example a guest network or a second router), or the router has client isolation turned on so devices cannot see each other.
Fix: Connect both to the same network and turn off client isolation (sometimes called AP isolation) in the router settings. Automatic reconnect after an address change also needs devices to see each other.
It worked before, but stopped after my router or network changed
Likely cause: Your PC got a new address. The phone normally finds it again by name on your Wi-Fi and reconnects by itself, with no new pairing, as long as both are on the same network and your router lets devices see each other.
Fix: Make sure the phone and PC are on the same Wi-Fi. If it does not reconnect, pair again by scanning a new QR code.
The pairing QR code expired
Likely cause: The code is single use and valid for 5 minutes.
Fix: On the PC right-click the tray icon and choose Pair new phone to get a new code, then scan it with Scan QR to pair.
Photos are not uploading
Likely cause: Your PC is off or not reachable, MediaShoot is not running, the devices are on different networks, or sync is paused.
Fix: Check that your PC is on, MediaShoot is running, and both devices are on the same Wi-Fi. The app's status screen says when your PC is not reachable and how many photos are waiting; they upload automatically once it is reachable. Also check that the photo's folder is set to Auto in Folders, and that sync is not paused (see below).
Backups are slow or stop when the app is in the background (battery restrictions)
Likely cause: Some phones stop background apps to save battery.
Fix: In Android settings, open Battery for MediaShoot and choose Unrestricted (or remove it from the optimised apps list). The app's "Keep backups reliable" card opens these settings for you. Xiaomi, Huawei, OnePlus and Samsung also have their own settings, such as Autostart, App launch or Never sleeping apps; allow MediaShoot there too. See dontkillmyapp.com for steps for your phone.
The "delete uploaded photos" prompt does not appear
Likely cause: Photos are only offered for deletion when the delete policy allows it, the PC has confirmed an identical copy, the waiting time has passed, and sync is not paused. Deleting also needs Android 11 or later.
Fix: Open Delete from phone in the app and check the policy is not Never. Make sure the photos have finished uploading and sync is not paused. Allow notifications for MediaShoot; the main screen also shows a card when photos are ready to delete.
Sync is paused
Likely cause: You used Pause sync for now. While paused nothing is uploaded and nothing is offered for deletion, although new photos still wait in the queue.
Fix: Tap Resume on the main screen, or wait for the timer to end. Sync past photos also needs sync to be resumed first.
I reinstalled the PC app and the phone no longer connects
Likely cause: Uninstalling the Microsoft Store version removes the app's settings, including its certificate and the list of paired phones, so the phone no longer trusts the new install.
Fix: Pair again: choose Pair new phone in the tray menu and scan the new QR code.
Where to find the log, and what to send to support
The PC app writes a file called server.log in %APPDATA%\PhotosUploader. To open it, press Windows + R, type %APPDATA%\PhotosUploader and press Enter. If you cannot find the file there, say so in your email and we will help you locate it.
If you still need help, email support@mediashoot.net with:
- what you expected and what happened;
- your phone model and Android version;
- the MediaShoot version on the phone and on the PC;
server.log(it does not contain your photos).
Contact
Questions or problems: support@mediashoot.net